miniDSP Ltd, Hong Kong /
/ Features and specifications subject to change without prior notice
9
2
B
OARD OVERVIEW AND
C
ONNECTIVITY
This section describes the board and its interfaces.
2.1
B
OARD LAYOUT
This diagram shows the layout of the miniSHARC board.
Note
: the miniSHARC is delivered with two different header configurations. By default:
•
If the miniSHARC is ordered alone, it will be delivered without the 30-pin headers for J1 and J2 soldered.
This is so that you can solder your own headers or connections. Straight headers for USB, VOL-FP, and
DIGI-FP will be soldered in.
•
If the miniSHARC is ordered together with a miniDAC8, it will be delivered with straight 30-pin headers
for J1 and J2 soldered. This is so that it interfaces directly to the miniDAC8 in the standard piggyback
configuration (page 17). In addition, right-angle headers will be soldered in for the USB, VOL-FP and
DIGI-FP headers.
If you require a header configuration other than the default, please put a clear request in the order form when
you place the order.
