miniDSP Ltd, Hong Kong /
/ Features and specifications subject to change without prior notice
22
4.6
R
OUTING TAB
This tab mixes or routes the input channels and the Bass Mgt signal and sends them to the Dirac Live processing
algorithm. The input channels are labeled along the left, and the output channels are labeled along the top.
There are 9 input channels and 8 output channels. Here is the default setting:
At each cross-point of the matrix, turn signal routing on and off by clicking. When routing is on for that cross-
point, the level at which the input channel (labels along the left) is mixed into the corresponding output channel
(labels along the top) is displayed in yellow. Any number of input channels can be mixed to each output channel.
Note: To rename an input channel, click on its label and type in a new name (maximum of eight characters).
To change the gain of the mixed signal at a cross-point, right-click on the cross-point to pop up the gain control.
Move the slider
–
or alternatively, type the value directly in to the entry box below it
–
press the Enter key
, then
click the
close
button. The gain can be set in 1 dB steps between -72 and +12 dB.
Each cross-point can also have the signal inverted by clicking on the
Invert
button. When the mixed signal is
inverted, the button will be displayed in green and its label will change to “Inverted”.
The lettering of the cross-
point will be highlighted in green.
