miniDSP Ltd
–
Hong Kong /
/ Features and specifications subject to change without prior notice
9
2.2
DC
P
OWER
The supplied 5 VDC power supply includes a set of interchangeable power pins. Fit the correct pins for your
country. Connect the DC plug to the 5 VDC power socket.
2.3
USB
Computer connectivity is required to perform acoustic measurements in your listening room and to generate
and download the digital room correction filters to the
DDRC-22D
. To configure the processor, connect the USB
port of the processor to a USB 2.0 port on your computer using the supplied cable. For measurements, connect
the UMIK-1 to a second USB port.
Once calibration and configuration is complete, the computer can be disconnected. The processor can then be
controlled from the front panel or via remote control
–
see Section 6,
