miniDSP Ltd, Hong Kong /
/ Features and specifications subject to change without prior notice
13
3.2
H
ARDWARE CONNECTIVITY
Connections to the C-DSP 6x8 are made on the front and rear panels.
3.2.1
Analog inputs
There are four analog output channels. Unbalanced connections can be made directly to the RCA jacks on the
front panel. Be sure to take careful note of the channel numbering shown in this diagram and on the front panel.
These inputs accept a maximum input voltage of 4 VRMS.
Alternately, connections can be made by connecting bare wire ends to the push-in terminal block. Remove the
terminal, and connect individual positive and negative wires to each set of screw terminals. After all connections
are secure, firmly re-insert the terminal blocks. These inputs accept up to 8 VRMS.
