USER GUIDE
28
22.5 Tuning – F5
You can tune the image of any computer screen from the
Main
window.
To adjust the screen image:
1. Navigate to the computer line you wish to adjust.
2. Press
F5
. The screen image of the selected computer appears, together with the
Image Tuning label, see Figure 30.
Figure 30 Image Tuning label
3. Adjust the image by using the
Right
and
Left
Arrow keys.
4. When the image is satisfactory, press
Esc
.
Note
! Picture quality is relative to distance. The further away a computer is from
the Smart 216, the lower the image quality, and the more tuning needed. So place
the higher resolution computers closer to the Switch.
22.6 The Settings window - F2
Press
F2
. The Settings window appears see Figure 31.
Figure 31 Settings window
In the
Settings window navigate downwards using the
Tab
key. At the bottom of
the window, press
Tab
to go to the top of the window. Change settings by typing in
the selected area or by pressing the spacebar – whichever is relevant.
[Changing the network parameters from the OSD is explained with the initial
configuration on page 11].
Содержание Minicom Smart 216
Страница 34: ...SMART 216 232 33...