Mini MINI E, Руководство пользователя, Страница: 21 / 120

REFERENC
E
AT
A
GL
AN
C
E
CO
NT
R
O
LS
D
R
IV
ING
TI
P
S
MOB
IL
ITY
19
> Settings for the displays in the speedometer
and charge status display:
>
12h/24h mode of the clock, refer to For-
mats and units of measure
42
> Date format, refer to Formats and units
of measure
42
> Units of measure for energy consump-
tion, distance covered/remaining dis-
tances and temperature, refer to Formats
and units of measure
42
> Light settings:
> Pathway lighting 55
> Daytime running lamps 56
> Entertainment:
> Audio volume, refer to separate Owner's
Manual
> Speed-dependent volume, refer to sepa-
rate Owner's Manual
Central locking system
The concept
The central locking system is ready for operation
whenever the driver's door is closed.
The system simultaneously engages and
releases the locks on the following:
>
Doors
>
Tailgate
>
Charge socket door
Operating from outside
>
Via the remote control
>
Via the door lock
The anti-theft system is also operated at the
same time. It prevents the doors from being
unlocked using the lock buttons or door han-
dles. The remote control can also be used to
switch on/off the welcome lamps and interior
lamps.
Operating from inside
Button for central locking system, page 22 .
In the event of a sufficiently severe accident, the
central locking system unlocks automatically. In
addition, the hazard warning flashers and inte-
rior lamps come on.
Opening and closing:
from outside
Persons or animals in a parked vehicle
could lock the doors from the inside. Take
the key with you when you leave the vehicle so
that the vehicle can be opened from the out-
side.
<
Only park the vehicle with the doors and
windows fully closed to prevent water
from entering into the vehicle, e. g. if it should
rain. Otherwise there is a risk of personal injury
and damage to the vehicle electronics.
<
Using the remote control
Unlocking
Press the button.
The welcome lamps and interior lamps come on.
Unlocking mode
You can also set which parts of the car are
unlocked. The setting is stored for the remote
control in use.
1. Switch on the ignition, refer to page 32 .
2. Briefly press the button in the turn indicator
lever repeatedly until "SET/INFO" is dis-
played.
Online Edition for Part no. 01 41 2 601 475 - © 11/08 BMW AG