Mini Clubman 2019, Руководство пользователя

Страница: 84 / 324

After the tailgate is closed, it is locked and
monitored again provided the doors are
locked. The hazard warning system flashes
once.
Panic mode
You can trigger the alarm system if you find
yourself in a dangerous situation.
– Press button on the remote con-
trol and hold for at least 3 sec-
onds.
– Briefly press the button on the remote
control three times in succession.
To switch off the alarm: press any button.
Signals of the indicator light
– The indicator light flashes briefly every
2 seconds:
The alarm system is switched on.
– Indicator light flashes for approx.
10 seconds, then it flashes briefly every
2 seconds:
Interior motion sensor and tilt alarm
sensor are not active, as doors, hood, or
tailgate are not correctly closed. Cor-
rectly closed access points are secured.
When the still open access points are
closed, interior motion sensor and tilt
alarm sensor will be switched on.
– The indicator light goes out after un-
locking:
The vehicle has not been tampered with.
– The indicator light flashes after unlock-
ing until the engine ignition is switched
on, but no longer than approx. 5 mi-
nutes:
An alarm has been triggered.
Tilt alarm sensor
The tilt of the vehicle is monitored.
The alarm system responds in situations
such as attempts to steal a wheel or when
the vehicle is towed.
Interior motion sensor
The windows and the glass sunroof must be
closed for the system to function properly.
Avoiding unintentional alarms
General information
The tilt alarm sensor and interior motion
sensor can trigger an alarm, although no un-
authorized action occurred.
Possible situations for an unwanted alarm:
– In automatic vehicle washes.
– In duplex garages.
– During transport on trains carrying ve-
hicles, at sea or on a trailer.
– With animals in the vehicle.
– When the vehicle is locked after start of
fueling.
The tilt alarm sensor and the interior mo-
tion sensor can be switched off in such sit-
uations.
Switching off the tilt alarm sensor and
interior motion sensor
Press the remote control button
again within 10 seconds as soon as
the vehicle is locked.
The indicator light lights up for approx.
2 seconds and then continues to flash.
The tilt alarm sensor and interior motion
sensor are switched off until the vehicle is
locked again.
Switching off the alarm
– Unlock the vehicle with the remote con-
trol or switch on the ignition, if needed
Seite 84
CONTROLS Opening and closing
84
Online Edition for Part no. 01402723718 - VI/18