Minebea TMHSAD-01, Инструкция по эксплуатации

Страница: 35 / 42

27
10. Monitor
Check the torque AD value and status.
10-1. Screen Description
Name Description
Start Communication Starts communication with the TMHSA and displays on the monitor.
Stop Communication Stops communication with the TMHSA.
Torque AD Value
AD Counts Shows the torque AD value.
kHz Shows the input frequency.
Wave Height value
Voltage value display (V) Shows the wave height voltage value.
Hi wave height value Red when the wave height is high
Mid wave height value Red when the wave height is moderate
Lo wave height value Red when the wave height is low
A/Z
Status display Shows the A/Z status.
A/Z ON button Activates A/Z.
A/Z OFF button Deactivates A/Z.
CHECK
Status display Shows the check status.
CHECK button Switches between checking on/off.
Close Returns to the menu screen.
Enabled only when communication has stopped
Status: Shows the status.
Offline: Communication stopped
Connection: Communication in progress