Minebea Sartorius Intec Maxxis 4 PR 5500, Инструкция по эксплуатации инструмента, Страница: 47 / 407

PR 5500 Instrument Manual Device Installation
Sartorius EN-37
4.3.5 RS-232 Interface (built-in)
The device is equipped with an integrated RS-232 interface. This interface is configurable, and can be used, for
example, for data transmission to a remote display or printer.
Connection Terminal, 5-pin
Number of
channels
1
Type RS-232, full duplex
Transmission rate 300 to 115k2 Bit/sec
Parity None, odd, even
Data bits 7/8 bit
Input signal level Logic 1 (high) - 3 to - 15 V
Logic 0 (low) + 3 to + 15 V
Output signal level Logic 1 (high) - 5 V to - 15 V
Logic 0 (low) + 5 V to + 15 V
Number of signals Input: Rx, CTS
Output: Tx, RTS
GND CTS RxD TxD RTS
Potential isolation none
Cable gauge max. 1.5 mm
2
Cable length max. 15 m
Cable type Twisted pair, screened
(e.g. LifYCY 3x2x0.20), 1 pair of
wires for ground (GND).
TxD
RxD
CTS
GND
RTS