manualshive.com logo in svg

Minebea Sartorius Intec Maxxis 4 PR 5500, Инструкция по эксплуатации инструмента, Страница: 144 / 407

Поделиться
Скачать
Minebea Sartorius Intec Maxxis 4 PR 5500 Скачать руководство пользователя страница 144

Commissioning 

PR 5500 Instrument Manual

EN-134 Sartorius

5.9.4  User Login/Logout

5.9.4.1  User Login

An authorized user must log in to start the application 
or enter parameters.

t

t

Press the [Login] soft key to log in as a specific 
user.

Note

If the user “default” is active, a 
password must be entered. The 
empty entry window only needs to 
be confirmed to log in.

t

y

A login window appears.

t

t

Enter and confirm the user name.

t

t

Enter and confirm the password (access code). 

Note

Default:  
user name: “admin”  
password: “admin”

t

y

The user who is currently logged in is shown in 
the top right-hand corner of the display.

5.9.4.2  User Logout

t

t

Press the MENU key to switch to the operating 
menu.

t

t

Press the [Logout] soft key to log out the user 
who is currently logged in. If a password is 
required to log out the user (option activated 
in the user settings), the entry window appears 
accordingly.

Содержание Sartorius Intec Maxxis 4 PR 5500
























































































































































































































































































































































































































Отзывы:

Нет отзывов