manualshive.com logo in svg

Minebea Sartorius Intec Maxxis 4 PR 5500, Инструкция по эксплуатации инструмента, Страница: 101 / 407

Поделиться
Скачать
Minebea Sartorius Intec Maxxis 4 PR 5500 Скачать руководство пользователя страница 101

PR 5500 Instrument Manual 

Device Installation

Sartorius EN-91

4.4.8  PR 1721/61 ProfiBus-DP

4.4.8.1  Specifications

Communication protocols and the syntax comply with the ProfiBus-DP standard according to IEC 61158/
EN 50170, with transfer rates up to 12 Mbps.
The card is inserted in the Option 1/FB slot, see Chapter 13.6.

Internal connection

Pin strip, 50-pin

External connection

9-pin D-Sub socket (female) in module cover

Transmission rate

9.6 kbps to 12 Mbps, baud rate auto-detection

Connection mode

ProfiBus network, connections can be made/released without affecting other 
stations

Protocol

Profibus DP V0 slave

Configuration

GSD file 'SART_5500.gsd'

Cables

Special ProfiBus color: violet, screened twisted pair cable

Cable impedance

150 ¥

Cable length

The max. distance of 200 m can be extended at 1.5 Mbps by means of an 
additional repeater.

Bus termination

The bus termination in the last device is implemented via the integrated 
terminating resistor in the ProfiBus plug.

Potential isolation

Optocoupler in lines A and B (RS-485)

Dimensions (LxWxH)

55x50x22 mm

Weight

Approx. 33 g

Certificates

Profibus test center Comdec in Germany and PNO (Profibus User Organization).
Industry-compatible CE, UL and cUL.

Note

The GSD file is stored on the CD supplied with the device (Fieldbus directory of the respective 
device). The current file is also available for download via the Internet: 
http://www.sartorius-intec.com/en/products/software-tools/  
More -> Fieldbus-files

Содержание Sartorius Intec Maxxis 4 PR 5500
























































































































































































































































































































































































































Отзывы:

Нет отзывов