3
Setup instructions
3.1
Printer overview
1
Paper case cover
2
Panel
3
SEL button
4
LF button
5
Paper case
6
Printer head
7
Indicator light
8
Reserve case
9
Interface connector RS232
10
Power connector
11
ON/OFF Switch
3.2
Operation specification
After turning on the printer, the indicator light is on, shows that the printer is online, and
it is ready to receive data.
The light is off, shows that the printer is offline, and it can not receive data.
When the light flash to show the paper is lacking, and the printer can not receive data.
The SEL button can switch online or offline status.
When the printer is offline, press the LF button, and the printer will feed paper.
3.3
Self test
Turn on the printer, press the SEL button to make printer offline (when use new dot
matrix printing and thermal printing model, no need to
3 Setup instructions
Puro® Thermal Direct Printer YP-DP1
Minebea Intec
EN-5
