Minebea Intec Puro LargeCount EF-LT P1, Руководство по эксплуатации

Страница: 60 / 80

— CAL
— LIN
Selection of the scale to be linearized and
starting the linearization initiates a linearization
process for WP1
— WP 1 Initiates a linearization process for WP1
This process can be canceled by pressing the
(Exit) key.
The weight values are fixed.
— WP 2 Only visible if a second scale is defined in the
menu
Initiates a linearization process for WP2.
This process can be canceled by pressing the
(Exit) key.
The weight values are fixed.
— GEO
— END
Exit menu level
5.4.2.2 Menu settings
CAL.ADJ
5.4.3 Geographic adjustment factor (GEO) – procedure
The adjustment of the calibration based on the current location is carried out using the
geographic adjustment factor [GEO]. (Settings from 0 … 31 are available.) The table under
5.4.4 contains the GEO values for a wide range of latitudes.
Call up the menu mode:
Weight
Count
First weight value (flashing)
1. Press and hold the key.
Weight
The first menu item [METRO] is displayed in the "Weight" display.
2. Press the (No) key until the menu item [CAL.ADJ] is displayed in the "Weight"
display.
3. Press the (Yes) key to access the sub-menu item.
Compact scale Puro® LargeCount 5 Operating
EN-58 Minebea Intec