Minebea Intec PR 5211 Series, Инструкция по эксплуатации инструмента, Страница: 84 / 96

320 … 1920 ms –> P53: 0
7.5.11 Parameter P43: Test operating mode
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Byte 0
Byte 1
Byte 2
Byte 3 MODE
MODE 0 = absolute, 1 = relative, default = 0
7.5.12 Parameter P44: Standstill time
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Byte 0
Byte 1
Byte 2
Byte 3 STIME
Time expressed in multiples of the measurement time at which a standstill is detected.
STIME: 1 … 9 times the measurement time, default = 1
7.5.13 Parameter P45: Standstill range
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Byte 0
Byte 1
Byte 2 SRANGE MSB
Byte 3 SRANGE LSB
Limit to define the weight to be in standstill.
SRANGE: 0 … 10.00 d, default = 1 d
Value = d x 100
7.5.14 Parameter P46: Standstill timeout
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Byte 0
Byte 1
Byte 2
Byte 3 TIME
Number of measurement times, during which the standstill condition should be reached.
TIME: 0 … 100 M (measurement times), default = 8
Transmitter Series PR 5211 7 ProfiBus interface
Minebea Intec EN-82