Minebea Intec Maxxis 5 Phase PR 5900/81, Руководство по эксплуатации

Страница: 61 / 94

WP-A WP-A Max 3000g d= 0.1g
3 7 1 5 2
N N
+ +
gg
2490g 2500g 2510g
Scale-A
Production line
Recipe
Setpoint
Difference
Tol. alarm Fill net B1 WPA
Single 1
2500.0 g
-17.3 g
Continue Accept Recipe
In PR 8400 (P), the alarm is displayed in the "Process" window for the
production line; it is entered into the alarm table at the same time.
Selecting [Continue] will resume the batching process following manual correction (in this
case: removing material).
Selecting [Accept] will accept the batching (quantities are recorded).
7.3.7 Checking the Material
The "Check material ID" function is used to verify the manual components to be batched
via a bar code scanner or keypad entry.
The default setting for entering the ID via the keypad can be selected on the device under
[Coniguration] - [Parameter] - [ID input ield] : Text =
, numerical = .
This means switching on the device is no longer necessary.
To activate the material check, [ID=1] must be entered in the [Parameter] ield under
[Component] - [Edit] /[Create] in PR 8400 (P).
You also have the option of transmitting the contents of the barcode to the device. If a
value is speciied for [Bar], the check takes place for the entry. If no value is speciied, the
check takes place for the material name.
WP-A WP-A Max 3000g d= 0.1g
7 0
+ +
gg
2480g 2500g 2520g
Scale-A
Production line
Recipe
Setpoint
Difference
Coarse Fill net
PL 1
Manual
2500.0 g
100.0 g
Stop Recipe
? ?
Material ident check for
'Fill manually'
123..
After you start a manual component with a material check, an input window opens.
. Enter the ID using the keypad and conirm and/or scan this in.
7 Operation and visualization of the scales Phase PR 5900/81
Minebea Intec EN-59