Minebea Intec Maxxis 4, Руководство по установке

Страница: 31 / 112

4.4.5 SD card slot
The internal SD card slot is located on the back of the device. It comes with an appropriate
SD card. The SD card is only used for storage; it is not used for data transfers.
Note:
Only SD cards supplied by Minebea Intec may be used. No warranty is given for third-
party cards.
The following data is saved to the SD card:
- The backup directories for the coniguration and database
- A copy of the current version of the BIOS, irmware, and application
- A copy of the version of the BIOS, irmware, and application as delivered
- Manuals
You also have the option of saving application data.
CAUTION
The SD card is a ixed component of the device.
The SD card should only be removed together with the SIL chip during servicing (for
information on replacing the device, refer to Chapter 5.2.4 ).
The SD card may not be used for data transfers.
The SD card may not be used in a notebook/PC.
The SD card is backed up by a rechargeable battery in the event of a power failure, which
means that the current activity (e.g., reading data) will be continued and completed.
4.4.6 RS-232 interface (internal)
The device is equipped with an integrated RS-232 interface.
This interface is conigurable, and can be used, for example, for data transmission to a
remote display or printer.
Connection options using the RS-232 interface:
- Connecting a YDP14IS ticket printer via RS-232; see Chapter 4.4.6.1
- Connecting additional printers; see Chapter 4.4.6.2
- Connecting an IS platform via RS-232; see Chapter 4.4.6.3
- Connecting a Mettler scale via RS-232; see Chapter 4.4.6.4
4 Device installation Process Controller Maxxis 4 PR 5500
Minebea Intec EN-29