Minebea Intec EF-LT-3-P1, Руководство по эксплуатации

Страница: 55 / 86

— BAUD Baud Rate
— 4800 4800
— 9600 9600*
— 19200 19200
— 38400 38400
— 57600 57600
— 115200 115200
— PARITY Parity
— 7 EVEN 7 data bits, even parity
— 7 Odd 7 data bits, odd parity
— 7 NONE 7 data bits, no parity
— 8 NONE 8 date bits, no parity*
— 7 MARK 7 data bits, no parity
— 7 SPACE 7 data bits, no parity
— STOP Stop Bit
— 1 1*
— 2 2
— HAND.SH Handshake
— NONE No Handshaking*
— XON-.XOF has no function
— RESET Factory setting
— NO not restored*
— YES enabled
— END Leave menu level
— CAL Initiates a span calibration procedure (zero and
span)
— WP 1 Initiates a span calibration procedure for WP1
This procedure is interruptable by the
(Exit) Button
The span weight is freely selectable by input
the value
— WP 2 Only visible if there is a second scale defined
in menu [OP.FUNC] - [WP2]
:
Initiates a span calibration procedure for WP2
This procedure is interruptable by the
(Exit) Button
The span weight is freely selectable by input
the value
— LIN Initiates a linearity calibration procedure (zero,
mid-point and span)
— WP 1 Initiates a linearization procedure for WP1
7.4.7 Menu Selection [PC.COM]
Enter this menu to define PC Communication parameters.
Default settings are identified by an "*"
PC.COM
7.4.8 Menu Selection [CAL.ADJ]
Default settings are identified by an "*"
CAL.ADJ
7 Menu Settings Compact Scale Puro® Count
Minebea Intec EN-53