manualshive.com logo in svg

Minebea Intec EF-LT-3-P1, Руководство по эксплуатации

Поделиться
Скачать
Minebea Intec EF-LT-3-P1 Скачать руководство пользователя страница 21

6.2.3

Preset Tare

There is only

one

Tara storage in the device which contains either a measured weight

value (pressing

button) or an entered value (Preset Tare).

Clearing Preset Tare by:

Set new Tare value by:

Pressing

Button when pan is loaded, then the Tara storage is overwritten with the

weight on the pan.

Or pressing

Button when pan is unloaded. Clear Tara storage.

After Turning OFF the device Preset Tare is also cleared.

6.2.4

Weight Unit switch

You can toggle the display of a weight value between different weight units.

Possible units are: gram [g], kilogram [kg], pound [lb], ounce [oz], pound-ounce [l:o].

Only such units that have been activated in the menu can be changed.

While the button is pressed the unit will change and after about 2 second the next
unit will be displayed and so on, until the button is released.

The units switch results on Display-Weight and Display-PW:

Tared value on Display-Weight:

Weight

1.

Enter a weighing value like [0.010] via the numeric keypad or a Scanner.

Count

This value is shown on the Display-Count.

2.

Press the

Button briefly.

The weight value on Display-Weight is calculated with this Preset Tare value
advance.

The actual number of pieces on the pan is recalculated and displayed on the
Display-Count.

The input value is set as Preset-Tara with the actual unit and overwrites the
actual value in the Tara storage.

3.

Pressing

Button when pan is unloaded.

Clear Tara storage.

Pressing the

Button for a long time will change the displayed unit.

6 Application Programs

Compact Scale Puro® Count

Minebea Intec

EN-19

Содержание EF-LT-3-P1























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды