Minebea Intec CSD-918 Series, Руководство по эксплуатации

Страница: 212 / 240

20.3.2 Display speciications
Display Wide viewing angle 6.2 inch TFT color LCD unit
Number of dots 640 dots x 240 dots
Display
Dot pitch 0.077 mm x 0.231 mm
Brightness
Approx. 130 cd/m
2
(typically)
Backlight
Life Approx. 40 000 h at 25 °C (typically) before the surface brightness
will reach 50 % of initial.
Display range -999 999 to 999 999
Display increment 1 (can be changed to 2, 5, 10, 20 or 50)
Display style 7-segment method (character height: 22 mm)
Overload displays [-OL] for negative overload, [OL] for positive overload
Load display
AD value overload display [-OVF] for negative overload, [OVF] for positive overload
Condition display GROSS / NET, TARE, PRE.TARE, STABLE, HOLD, Z-ERR, RUN, CZ,
F.FLOW, M.FLOW, D.FLOW, OVER, OK, UNDER, FULL, Z-BAND, FI-
NISH, BATCH / DISCH. SEQ. / MEAS. /OUT / MI
Display refresh rate 4 times/s (can be changed to 20 times/s)
Decimal point display
Can be switched between no display, 10
1
, 10
2
, 10
3
and 10
4
Unit display Can be switched between none, g, kg, t, lb, N and kN.
Setting value display Final, F.FLOW, M.FLOW, Over, Under, D.FLOW
Brand display Code No.: 00 to 99, Brand name: Up to 15 characters
Accumulation display Accumulation value : 0 to 99 999 999, Accumulation times : 0 to
999 999
Graphic display The weighing status is displayed as a waveform.
20.3.3 Interfaces
External control input 11 functions can be selected from the following:
OFF, Gross weight/Net weight, Zero, Zero clear, Tare weight, Tare weight cle-
ar, Inlow start, Discharge start, Mixing start, Manual overshoot correction,
Accumulation command, Cancel accumulation, Temporary stop, Restart, Cle-
ar the accumulation data of read-out, Clear the accumulation data of all
brand codes, Force-inish weighing operation, Force-inish discharge, Reset
error, Print command
Above are for pulse input, and efective only once at a pulse width of 50 ms or
longer.
Switch inlow and discharge, SAFETY CHECK input No. 1, SAFETY CHECK input
No. 2, SAFETY CHECK input No. 3, SAFETY CHECK input No. 4, SAFETY CHECK
input No. 5, SAFETY CHECK input No. 6, SAFETY CHECK input No. 7, SAFETY
CHECK input No. 8, Manual coarse low, Manual middle low, Manual ine
low, Manual discharge, Hold, MANUAL CONTROL
The above level input items are valid at a bridge input of 50 ms or more.
Weight Controller CSD-918 20 Appendix
EN-210 Minebea Intec