Minebea Intec CAW2P, Руководство по эксплуатации

Страница: 126 / 224

7.8.6 Example: Neutral Measurement
25 m of electrical cable is to be measured.
Coniguration : The "Neutral Measurement" iapplication is selected, and printout has
been set up (see chapter 7.16 ).
This is not required if the automatic tare function is active. The tare weight is saved
automatically when you place the container on the platform.
or
Set the number of reference parts using key: 1, 2, 5, 10, 20, etc.
1. Place empty container on the scale.
2. Tare the scale with key.
3. Enter the weight of 1 meter of cable using the keypad (in this example, 248 g).
4. Save the value entered with key.
5. Start the calculation of the reference piece weight starten with key.
6. Place the desired amount of cable into the container (25 m in this example).
The result is displayed.
Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating
EN-124 Minebea Intec