manualshive.com logo in svg

Minebea Intec CAS1, Руководство по эксплуатации, Страница: 47 / 160

Поделиться
Скачать
Minebea Intec CAS1 Скачать руководство пользователя страница 47

5.4 Menu mode

5.4.1

Switch to the menu

The individual basic settings are made in the menu mode by selecting the desired

parameters.

-

Menu navigation, see Chapter

3.3.3.3

.

-

Menu structure, see Chapter

6

.

If it is already switched on: briely switch of and then back on again.

5.4.2

Saving menu settings

The parameters selected in the menu remain saved when switching into the measurement

mode or when the device is switched of. Access to the [SETUP] menu can be locked with

a code word, meaning that unauthorized or unintentional adjustment of the parameters

set in the menu is prevented (see Chapter

5.5.2

).

5.5 Default settings

The individual basic settings are made in the menu mode by selecting the desired

parameters. These are summarized into the following groups (1st menu level), menu

structure see Chapter

6

:

-

[ANWEND.] Application parameters (see Chapter

6.1

)

-

[FN-K] Function key (see Chapter

6.2

)

-

[SETUP] Device parameters (see Chapter

6.3

)

-

[INFO] Device-speciic information (see Chapter

6.4

)

-

[SPRACHE] User language (see Chapter

6.5

)

Where veriication is mandatory, the selection of the individual parameters is restricted,

and only those parameters that can be selected are displayed.
The factory settings of the parameters are indicated with an "*" in the menu structure (see

Chapter

6

).

1. Switch on the device with key

.

2. During the display test, briely press the key

.

The top level is always displayed ([ANWEND.], factory setting is English [APPLIC.].

The menu is opened.

5 Getting started

Combics 1 Series Complete Scales Models CAW1P, CAW1S, CAS1

Minebea Intec

EN-45

Содержание CAS1

































































































































































Отзывы:

Нет отзывов