Mine Site Technologies NS40 I.S., Руководство пользователя, Страница: 57 / 98

Description Field
•
WPA-PSK/WPA2-PSK Mixed Mode
allows both WPA and WPA2 clients
to connect to the same SSID.
Enables or disables visibility of the wireless network. Hide SSID
Configuring WEP Security Settings
To configure WEP security settings:
1. Select the
WEP
mode from the Encryption drop-down box.
2. Enter a password in the
Key
field.
3.
Click
Save
to save settings or
Save & Apply
to save and instantly apply settings to the device.
Configuring WPA-PSK and WPA2-PSK Settings
WPA and WPA2 provide stronger security encryption than WEP.
To configure settings:
1.
Select
WPA-PSK
,
WPA2-PSK
or
WPA-PSK/WPA2-PSK Mixed Mode
mode as required from the
Encryption drop-down menu.
2. Enter the Pre-Shared Key in the Key field. The key must be at least 8 alphanumeric characters in
length.
3. Click Save to save settings or Save & Apply to save and instantly apply settings to the device.
Configuring Wireless Extensible Authentication Protocol (EAP)
WPA-EAP
and
WPA2-EAP
require a RADIUS server for authentication. To configure wireless EAP:
1. Select the WPA-EAP or WPA2-EAP mode from the
Encryption
drop-down box.
2. In the RadiusServer field, enter the RADIUS server's IP Address.
3. In the Radius-Port field, enter the RADIUS port number.
4. Enter the Pre-Shared Key in the Key field. The key must be at least 8 alphanumeric characters in
length.
5. Click Save to save settings or Save & Apply to save and instantly apply settings to the device.
4.6.3 Configuring Composite Fibre Ports
The Ports page enables and assigns composite fibre ports to be either in trunk or access mode. A trunk
port is a member of all enabled VLANs whilst an access port is a member of only one VLAN. For more
information on trunk ports and access ports, see
Understanding Trunk and Access Ports on page 30.
NS40 I.S. Wireless Network Switch 57 Revision C
Configuration using the Web Interface