Mine Site Technologies impact, Руководство пользователя, Страница: 58 / 130

Figure 26: Tracking configuration screen
There are three sections on the Tracking configuration screen:
RSSI Lower Thresholds
These settings are used to control what location reports are sent to the postioning engine. If a Wi-Fi tag
or mobile unit report is received with an RSSI below the relevant threshold, it is not sent to the Positioning
Engine (whether it is an AeroScout
®
Positioning Engine or MST Tracker Engine).
Tracker Engine List
This section is used to configure the MST Tracker Engine(s) that the access point will send information
to. The available settings are listed below. Note that data can be sent up to 2 MST Tracker Engine instances.
Settings Description Field
On or Off. Indicates whether the Tracker Engine will be sent
data. Enable
Specific to each site. The IP address of the MST Tracker Engine. Server Address
Default is 1142. The UDP port that the Tracker Engine listens for
messages on. Server Port
Default is 15 seconds. The period that status reports will be sent from the
Access Point to the Tracker Engine. These status Status Reporting
Interval
reports are used by the Tracker Engine to
determine if the Access Point is up or down.
Advanced Settings
There is a single advanced setting called "Drop non-exciter tag reports". If the check box is enabled, the
Access Point will only send tag reports when the tag is in an AeroScout
®
exciter field.
This setting applies to tag reports that are sent to AeroScout
®
Positioning Engines and MST Tracker
Engines.
Revision A 58 Wireless Network Switch User Manual
Configuration Using the Web Interface