Mindray Zonare ZS3, Руководство по обслуживанию

Страница: 72 / 295

ZS3 Service Manual Page 72 of 295
8 Patient Information
Management
You can start a patient exam in the following situations:

New patient information: to start a new patient exam, patient information must first
be entered.

New exam: to start a new exam for patient who is already registered, the recorded
information can be obtained through either Archive or Worklist.

Restart an exam: to select an exam that has been completed within 24 hours,
continue the exam with imported patient information and exam data.

Resume an exam: to select an exam that has been paused within 24 hours,
continue the exam with imported patient information and exam data.
General procedure for an exam:
Enter the patient information

select an exam mode and probe

Choose an imaging
mode

Start the exam.

The system supports image scanning and measurement without patient information.
Patient Information
To start a new patient exam, it is better to type the detailed patient information. The
system will set up a unique information database for each patient based on the patient
information entered, so that the information of one patient will not be confused with that
of another patient.
CAUTION:
Before examining a new patient, tap the [End Exam] key on the
keyboard to end the exam of the previous patient, update the
patient ID and information, to avoid mixing data of the next new
patient.

To enter the "Patient Info" screen

Press [New Patient] on the keyboard to enter the patient information page.

To exit the Patient Info screen
 Exit and save the settings: tap [OK], or Press [New Patient] on the keyboard.

Exit without saving the information: click [Cancel] on patient information page.
 Press <B> or <Freeze> to return to the current exam mode.