Mindray M7Vet, Инструкция по эксплуатации

Страница: 21 / 43

17
13
Image Optimization: PW/CW
1. Select a high-quality image during B mode or B+ Color (Power) scanning, and
adjust to place the area of interest in the center of the image.
2. Press / to adjust the sampling line,
z The sampling status will be displayed in the image parameter area on the left
part of the screen as follows:
z The sampling correction angle value will be displayed above the image, as
described in the following table:
PW Sampling Line
Adjustment SV Size SV 3.0
Angle Angle 0
SVD SVD 10.5cm
CW Sampling Line
Adjustment Angle Angle 0 °
CW Focus Position SVD 13.2cm
3. Set the position of the sample line by moving the trackball left and right, and set
the SVD by moving the trackball up and down, adjust the angle and SV size
according to the actual situation.
4. Press / again or to enter PW/CW Mode and perform
the examination. You can also adjust the SV size, angle and depth in the real-time
scanning.
5. Adjust the image parameters during PW/CW mode scanning to obtain optimized
images.
6. Perform other operations (e.g. measurement and calculation) if necessary.