Mindray Imagyn 7, Руководство оператора

Страница: 341 / 492

17 Probes and Biopsy
Operator’s Manual 17 - 23
Compatible Disinfectants
17.1.10Storage and Transportation for Sensor Support
(Fusion)
When all examinations for the day have been completed, confirm that the sensor support is in good
condition. After disinfecting the sensor support, confirm that the sensor support is in good
condition and stored in a suitable place.
•
To prevent the sensor support from being damaged, DO NOT store it in locations where it may
be exposed to:
–
Direct sunlight
– Sudden changes in temperature
– Dust
– Excessive vibration
– Heat generators
• Store and transport sensor support under following ambient conditions:
–
Ambient temperature: -20°C ~ 55°C
– Relative humidity: 20% ~95% (no condensation)
– Atmospheric pressure: 700 hPa ~1060 hPa
17.1.11Sensor (Fusion Imaging) Cleaning and Disinfection
CAUTION
• When performing cleaning and disinfection of the sensor to prevent
infection, wear sterile gloves.
Manufacturer Trade Name Procedures Type
Metrex MetriZyme Please refer to the instructions
provided by the manufacturer
of the solution for details. Solution
ASP Cidex Activated
Glutaraldehyde Solution Please refer to the instructions
provided by the manufacturer
of the solution for details. Solution
ASP Cidex OPA Please refer to the instructions
provided by the manufacturer
of the solution for details. Solution
Ecolab Inc. Ster-Bac Please refer to the instructions
provided by the manufacturer
of the solution for details. Solution
Advanced
Ultrasound
Solutions Inc. SONO Ultrasound Wipes Please refer to the instructions
provided by the manufacturer
of the solution for details.
Wipe
Professional
Disposables
International,
Inc. Sani-Cloth Please refer to the instructions
provided by the manufacturer
of the solution for details. Wipe