Mindray ePM 10M, Руководство оператора

Страница: 74 / 364

8 - 2
NOTE
•
When the pressure units are converted among cmH
2
O, hPa and mbar, the parameter values remain
unchanged, for example, 1cmH
2
O=1hPa=1mbar, which may differ from some external devices.
8.4 Connecting an External Device
To connect an external device, follow this procedure:
1. Connect one end of the serial port cable with the multifunctional connector of the monitor.
2. Connect the other end of the serial port cable with an external device.
3. Switch on the external device.
CAUTION
•
First installation and debugging should be executed by Mindray service personnel or authorized
technician.
8.5 Accessing the Integrated Devices Screen
You can view the information of external devices in the
Integrated Devices
screen of the monitor. To access the
Integrated Devices
screen, follow this procedure:
■ Select the
Integrated Devices
quick key.
■ Select the
Screen Setup
quick key
→
select the
Choose Screen
tab
→
select
Integrated Devices
.
■ Select the
Main Menu
quick key
→
from the
Display
column select
Choose Screen
→
select
Integrated
Devices
.
■ Select the numeric area or waveform area of any parameter from the external device
→
select the
Integrated Devices
button.
The
Integrated Devices
screen has the following features:
■
For the parameters measured by the external device, the measurements display directly after the
parameter labels.
■ For the parameters controlled by the external device, the settings are enclosed in parenthesis after
parameter labels.
■
For the parameters measured and controlled by the external device, measurements and settings are
displayed after parameter labels, and settings are also enclosed in parenthesis. For example, PEEP 18 (20),
in which PEEP is parameter label, 18 is the measurement, and (20) is the setting.