Mindray DC-80A, Руководство оператора

Страница: 233 / 391

Patient Data Management 10-19
When the task management icon displays as , it means no task is underway or has failed.

DICOM Service Setting
On the Storage Task and DICOM Print Task page, click [Service Setting] to enter the DICOM
service setting screen. For details, see the DICOM chapter.

Troubleshooting
If a serious error occurs, such as network disconnection or operation timeout, the system can
try to reconnect the network. The interval time and maximum retries can be set as desired. For
details, see the DICOM chapter.
10.9 Administration
10.9.1 Access Control
The system supports two types of users: system administrator and operator.
Administrator
The system administrator can access all function modules, and view all patient data, such as
patient information, images and reports, etc. Only one administrator is configured by default.
The administrator can add or delete operators.
Operator
The operator can only access the function modules with assigned privileges (for details about
privilege assignment, please refer to "10.9.4 Local Privilege Management" and "10.9.5 LDAP
Privilege Management"). The operator can only view exam information saved in the system
and operated by him or herself, such as patient information, images and reports, etc. The
operator cannot view exam data operated by others.
10.9.2 Enabling Access Control
The system administrator can preset the access controls, that is, whether an operator has the right
to access data in the system.
Access control only can be set by the system administrator.
Setting access control:
1. Open the “Access Control” page using the path: [Setup]
→
[System]
→
[Access Control].
2. If is selected, you must be authorized before accessing the data,
and you can configure password policy and LDAP, and change password. If unselected, you
can access all the data without authorization, and you cannot configure password policy and
LDAP, and change password.
3. If is selected, the administrator can edit privileges for emergency
users. If unselected, the administrator cannot edit privileges for emergency users.
10.9.3 System Login
If access control has been set by the system administrator, you can access data in the system only
after logging onto the system.
You must log in again after system restart or dormancy.
Logging onto the system:
1. The following dialog box appears: