Mindray DC-25, Руководство по обслуживанию

Страница: 179 / 213

Troubleshooting of Regular Malfunctions 11-1
11
Troubleshooting of
Regular Malfunctions
11.1 System cannot be powered on
11.1.1 Module or Board Related
No. Descriptions Remarks
1 Battery assembly
2 Power module
3 CPU module
4 Isolation transformer Failure rate: low
11.1.2 Key Points Supporting Troubleshooting
No. Key Points Supporting Troubleshooting Remarks
1 AC power indicator
Located on control panel
2 Power -on status indicator
Backlight of the power button
3 Three Power indicators 1,2,3, located on IO rear board
11.1.3 Troubleshooting
No. Fault Description Cause Analysis Measure
1 Fail to start up when powered by the
battery only, but can start up normally by
AC power supply. After the machine is
powered on, battery alarm appears.
Internal battery
fails;
Related board or
module of the other
power system is in
normal status
Replace the
battery
2
No AC input, Fail to start up when
powered by the battery; The power on
indicator flash then turn off, battery
indicator flash, succeeding in start up
when AC input and battery can charge Battery is out of
power Charge up