BeneVision N1 Patient Monitor Operator’s Manual
5 - 3
5.6.2
Importing a Configuration
To import the configuration from the USB drive to the monitor, follow this procedure:
1.
Connect the monitor to the Dock.
2.
Connect the USB drive to the Dock’s USB port.
3.
Select the
Main Menu
quick key
→
from the
Configuration
column select
Manage
→
input the required
password
→
select .
4.
Select
Import Configuration
.
5.
Select the configurations and
User Maintenance Settings
to import.
6.
Select
Import
.
5.7
Loading a Configuration
You may make changes to some settings during operation. However, these changes or the pre-selected
configuration may not be appropriate for the newly admitted patient. Therefore, the monitor allows you to load
a desired configuration to ensure that all the settings are appropriate for your patient.
To load a configuration, follow this procedure:
1.
Select the
Main Menu
quick key
→
from the
Configuration
column select
Load
.
2.
Select the desired configuration.
◆
Select the configuration on this monitor in the
Local
page.
◆
Select the configuration on the USB drive in the
USB Drive
page.
3.
Select
Load
.
NOTE
•
The monitor may configure some settings by default when you load a configuration of different
software version with the current configuration.
5.8
Modifying Configuration Password
To modify the configuration password, follow this procedure:
1.
Select the
Main Menu
quick key
→
from the
Configuration
column select
Manage
→
input the required
password
→
select .
2.
Select
Modify
Password
.
3.
Respectively input the old password and new password.
4.
Select
OK
.
Содержание BeneVision N1
Страница 1: ...BeneVision N1 Patient Monitor Operator s Manual...
Страница 273: ...F 8 DCI DCIP 4050 4051 LNCS YI 4053...
