Mindray BeneFusion SP3, Руководство по обслуживанию

Страница: 9 / 80

1-3
in the infusion line.

This equipment must use professional medical consumables. When the
syringe used is not a standard consumable or when an uncalibrated
consumable is used, the accuracy will not be guaranteed. Please contact
us for calibration service.

When the peripherals are connected through the signal I/O port, the
patient cannot be touched at the same time, so as to avoid the patient
leakage current exceeding the standard requirements.

During defibrillation, do not touch the patient and other
non-defibrillation equipment to avoid electric shock. During
defibrillation, defibrillation will not affect the basic performance of the
equipment, such as infusion accuracy, alarm, signal transmission, etc.

The equipment uses a power plug to disconnect it from an AC power
source. Place the equipment in a location where the power outlet is
within easy reach.
1.1.3 CAUTION
CAUTION

To ensure patient safety, use the accessories specified in this manual.

When the equipment and its accessories are about to exceed their
lifespan, they must be disposed of in accordance with local regulations
or hospital systems.

Since electromagnetic fields can affect the performance of this
equipment, other equipment used near this equipment must meet the
appropriate EMC requirements. Mobile phones, X-ray equipment or MRI
devices are possible sources of interference as they may emit higher
levels of electromagnetic radiation.

Before connecting the equipment to the power line, check that the
voltage and frequency ratings of the power are the same as those
indicated on the equipment's label or in this manual.

Always install or carry the syringe pump properly to avoid damage
caused by drop, impact, strong vibration or other mechanical force.
After the equipment drops, the user must confirm that the equipment
can work normally, otherwise the equipment cannot be used.

After the disposable accessories are used, they must be disposed of in
accordance with the relevant regulations of the hospital.

The syringe pump must be protected from direct sunlight, high
temperatures and humidity.