Recorder Paper Replacement
User Maintenance
4 - 6
Accutorr Plus™ Operating Instructions
4.5
Recorder Paper Replacement
Use only recommended recorder paper, Part Number 0683-00-0447-XX, to insure that the
print quality will be acceptably dark. See Miscellaneous Accessories, section 5.2.5 for part
numbers of various quantities of recorder paper.
NOTE:
Use of low grade paper will result in shortened print head
life and poor print quality.
4.5.1
To Install Paper
1.
Open recorder door by pulling the door on the upper left side. An indented area is
provided there for ease of opening the door.
2.
Remove empty paper spool.
3.
Cut or tear off a clean angled edge on a new roll of paper.
FIGURE 4-2
Recorder Paper Installation
4.
Sit the new roll of paper inside the door with the free edge coming off the bottom of the
roll.
5.
Slide the free edge behind the metal edge at the top of the printer.
6.
Press the
key to feed the paper through the printer.
7.
Pull through any slack in the roll of paper and then close the recorder door.
