Type 2 AC EV charger Instructions-
V1.1.0
23
7. Emergency Stop Page
In case of emergency which needs to stop the charger, users can press the emergency stop button and the
charger screen will display the emergency stop fault page, as shown in Figure 9.3.2.13 below. Rotate the
emergency stop button clockwise to remove the emergency stop alarm state, and the screen will back to the
default interface.
Figure 9.3.2.13 Emergency stop fault page
8. System Remote Upgrading Instruction
In system remote upgrade process, the charger will be suspended in use and the upgrade page in the picture
below will be shown in Figure 9.3.3.14. During the upgrading process, the yellow standby indicator light of
the charger will flash every 1s in cycle.
Figure 9.3.3.14
Note: During the upgrading process, please wait patiently for the program finish upgrading before using.
