Type 2 AC EV charger Instructions-
V1.1.0
19
charging immediately. If the car has no S2 switch, when the charger output current is less than 1A
and last for 20min, the charger will automatically disconnect the output and stop charging. The
"green indicator" is always on.
5.
For cars with electronic lock, first needs to press the unlock button on the car to unlock the electronic
lock. After the retractable rod been withdrawn, the plug could be extracted. Otherwise the plug will
not be able to pulled out.
6.
After charging finished, disconnect the charger from the vehicle and place the plug back into the
designated position.
9.3.2 Charging Interface Instruction
1. Initialization page
After the charger is powered on, the screen display system will be initialized. After the initialization, enter the
default page of the charger, as shown in Figure 9.3.2.1/2/3.Meanwhile, the charger panel "yellow indicator
light" is always on.
Figure 9.3.2.1 Initialization Interface
Figure 9.3.2.2 Plug and charge mode dispaly Figure 9.3.2.3 Charge by card mode display
