3
1.
Safety Pre-caution and Note on Installation
※
Before Operation
◆
Thank you for purchasing our CK10 series.
◆
CK10 series are a high-performance 32bit ARM chip embedded Full Digital position
control stepping driving unit.
◆
This manual describe the handling, maintenance, repair, diagnosis and troubleshooting of
CK10 series.
◆
Before start operation of CK10, thoroughly read this manual.
◆
After reading this manual, keep the manual near CK10, so that any user can read this
manual whenever needed.
1-1. Precautions
◆
General Precautions
1. Contents of this manual are subject to change without prior notice for functional
improvements, change of specifications or user’s better understanding. In case of manual is
damaged or lost, please contact with MINDMAN’s agent or our company at the address on
the last page of this manual.
2. MINDMAN is not responsible for a product breakdown due to user’s dismantling for the
product, and such a breakdown is not guaranteed by the warranty.
◆
Safety Precaution
1. Before installation, operation, repairing the products, thoroughly read the manual and fully
understand the contents. Before operating the products, please understand the mechanical
characteristics of this products and related safety information and precautions.
2. This manual divides safety precautions into
Attention
and
Warning
.
Attention
If user does not properly handle the products, the user may seriously or
slightly injured damages may occur in the machine.
Attention
If user does not properly handle the products, a dangerous situation
(such as an electric shock) may occur resulting in deaths or serious
injuries.
Although precaution is only a
Attention
, a serious result could be caused depending on t
he situation. Follow safety precaution.
◆
Check the Product
Attention
Check the Product is damaged or parts are missing.
Otherwise, the machine may get damaged or the user may get injured.
