TempMinder® MRC680SJ Instructions
Congratulations on your purchase of the TempMinder MRC680SJ
. We hope you find these instructions
user friendly and easy to follow.
Main Unit
Remove protective cover from display front (otherwise the numbers will seem blurred and they won’t
change – Ha – get it??)
Insert 2 AAA batteries (use alkaline type for best results)
To Set Clock:
(Note: if you press & hold the “C/F” button, the numbers will scroll rapidly. Also, you have a full 60 seconds to
input the next piece of information).
Press and release “SET”. The hour will flash.
Press “C/F” button to adjust to correct hour.
Press “SET” to confirm – Minutes will now flash
Press “C/F” button to adjust to correct minutes.
Press “SET” to confirm. Seconds will now flash.
Press “C/F” button to start at Zero or simply press “SET” if seconds are not important.
Congratulations! You’ve just programmed the clock!
To Set Calendar (Date):
Press and release “MODE” button two times then press and release “SET” button. The year will now be
flashing.
Press “C/F” button to adjust to the correct year. Note if you go past the correct year, simply hold in the
“C/F” button. The years will fly by right through 2099 and start over again. When you have the correct
year flashing, press “SET” to confirm. The month will now flash.
Press “C/F” to adjust to correct month.
Press “SET” to confirm. The day will now flash.
Press “C/F” to adjust to the correct day.
Press “SET” to confirm.
The screen should now have the correct time, month and day (+date). Well done!
To Select ºC or ºF:
Press and release the C/F button to change. Yes, that’s all!
To Set Alarm:
Press and release “MODE” button once. Clock will display 12:00 AM with “AL” showing on right side.
Press “SET” – hour will begin flashing.
Press “C/F” to adjust to desired hour
Press “SET” to confirm – the minutes will now flash
