If you have any questions, please call MINCEY MARBLE CUSTOMER SERVICE at 1-800-533-1806.
Mincey Marble Mfg., Inc.
|
1940 New Harvest Road, Gainesville, GA 30507
|
800.533.1806
|
minceymarble.com
6
BRUNSWICK BYPASS DOOR ENCLOSURE SYSTEM INSTALLATION (cont.)
Before you install the GLASS DOORS, take note that the Factory Installed Glass Door Bracket’s Screw Heads
will need to be to the INSIDE of the track and the Nuts will need to be to the OUTSIDE of the track for bypass
clearance.
To install the GLASS DOORS, one person needs to be inside the Shower, tilting the GLASS DOOR up to the
Header. The other person can then insert the ROLLERS into the GLASS DOOR BRACKETS. You will need to
apply LOCTITE BLUE 243 threadlocker to the 5/16” Pan Head Screw before securing them into each side of
the GLASS DOOR.
SLIDE ROLLER INTO
TRACK ON GLASS DOOR
BRACKET, ADD LOCTITE
TO SCREW, SECURE IN
PLACE
TILT DOORS
UP TO HEADER
FROM INSIDE
THE SHOWER TO
AVOID LEADING
EDGE OF
BOTTOM RAIL
Next, you will need to drill a hole from the Vertical Wall Channel into the new location on the Bottom Rail
where the two END DOOR GUIDES will be installed using a
1
/
8
” Metal Drill Bit. After drilling the holes, clean
up any debris or shavings. Then, you will run a bead of 100% Silicone where the Bottom Rail and the Vertical
Wall Channels meet. You can then install the two END DOOR GUIDES.
NUTS TO
OUTSIDES
OF TRACK
DRILL HOLES INTO
BOTTOM RAIL WHERE
THE WALL CHANNEL
HOLES ARE FOR
END DOOR GUIDE’S
LOCATIONS
L
R
PAN
BOTTOM RAIL
VERTICAL WALL
CHANNELS
RUN BEAD OF 100%
SILICONE WHERE
BOTTOM RAIL AND
WALL CHANNELS
MEET
The DOOR GUIDES interlock into the Bottom Rail. Slide them back into the Bottom Rail as they were
disassembled at the beginning of these instructions. Start with the two END DOOR GUIDES (refer to
following page.)
3/8” PAN HEAD
SCREWS
NOTE: LOCTITE BLUE 243 is required
as a threadlocker to secure the
installation of the Roller Screws.
LOCTITE is NOT provided with the doors,
but is readily available at many hardware
stores, online at mscdirect.com or through
Mincey Marble at 1-800-533-1806.
