Mincey Marble Mfg., Inc.
1940 New Harvest Road
Gainesville, GA 30507
Ph: 800.533.1806
Fx: 770.531.0935
www.minceymarble.com
MATERIALS / TOOLS NEEDED CHECKLIST
PRE-INSTALLATION PIECES / PARTS LIST
ENCLOSURE SYSTEM INSTALLATION
Installation Instructions for Mincey Marble
Manufacturing’s Brunswick Bypass Shower Enclosures
ATTENTION: Prior to starting the installation, please read through these instructions. This will
help avoid any unneccesary breakage. Any breakage due to handling or installing this enclosure
system is the responsibility of the installer and is not covered under the Mincey Warranty. Mincey
recommends that two people are used to install this shower enclosure system due to the weight
and fragility of the glass panels. Mincey also recommends that you protect the glass, especially the
bottoms, and shower pan during installation. If your doors have frosted glass, the frosted side of
the glass goes to the outside of the shower.
These installation instructions apply to the Mincey Brunswick Bypass Shower Enclosure System. In these
instructions we are going to use an example with a 60” wide shower.
All Drawings Are Not To Scale.
6WDUWE\XQFUDWLQJWKHPDWHULDOVDQGFRQ¿UPWKDWDOORIWKHSDUWVDQGSLHFHVDUHSUHVHQW
The
Required Tools are listed below. The contents of the Hardware Kit are listed below. The Parts Diagram is on the
following page. Before you begin the installation, make sure that all of the pertinent surfaces are clean and free
of dust, debris and any shavings. After you perform any drilling, you will want to make sure the surfaces are
clean again - this includes the Shower Pan and the Shower Panel Walls.
MATERIALS / TOOLS NEEDED
INCLUDED IN THE HARDWARE KIT
RUBBER WALL
CHANNEL BUMPERS,
QTY: 6
DOOR ROLLERS
QTY: 4
CHROME
HEADER END CAPS, QTY: 2
1 3/4” PAN
HEAD
SCREWS,
QTY: 6
WALL
ANCHORS
QTY: 6
3/8”
PAN
HEAD
SCREWS,
QTY: 6
1/2”
FLAT
HEAD
SCREWS,
QTY: 6
GRAY
SCREW
COVERS
QTY: 6
CLEAR
SCREW
COVERS
QTY: 6
DRILL (CORDED OR CORDLESS),
5/16” MASONRY DRILL BIT,
1/8” METAL DRILL BIT
TAPE MEASURE
PENCIL
LEVEL
CAULK GUN,
100% SILICONE
RUBBER MALLET
PORTABLE BAND SAW
(PREFERRED METHOD)
HACK SAW
- OR -
PHILLIPS HEAD SCREWDRIVER
LOCTITE
BLUE 243
THREADLOCKER
