manualshive.com logo in svg

MIMAKI UJF-605RII, Руководство по эксплуатации

Поделиться
Скачать
MIMAKI UJF-605RII Скачать руководство пользователя страница 74

- 2-32 -

Printing Repeatedly (COPY)

Print the last transmitted data again.

This operation can be carried out from the operation panel or sub-panel in the same way.

• If the temperature in the water heater or in the UV device has not reached

the predetermined value, a message is indicated.  In this case, printing is

disabled. It is enabled when the error indication has disappeared.

STEPS:

1.

After printing data, enter the LOCAL

mode.

Set the media.

2.

Touch the [COPY].

3.

Touch the [ENTER].

4.

The LOCAL mode is displayed after print-

ing is completed.

• When the previous data does not

exist, the message shown below
appears and the LOCAL mode is
displayed.

<COPY>

NO DATA

COPY

< COPY>

UV NOT READY

<COPY>

WATER NOT READY

<<LOCAL>>

< COPY >  600X 600

HOST / 32P

COPY

<ENT>

<<LOCAL>>

Содержание UJF-605RII











































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды