MIMAKI UJF-605RII, Руководство по эксплуатации

Страница: 68 / 170

- 2-26 -
Setting Precisely the Origin ([FUNCTION] - [ORIGIN])
To precisely set the origin of coordinates, set its X- and Y- coordinates from the [FUNC-
TION] menu. This setting value become the origin position (0, 0).
• After setting the origin position (0, 0), it is not cleared when the power is
turned off. However, if the origin position is changed by JOG operation, the
setting value is cleared. ( P. 2-25)
STEPS:
1. Touch the [FUNCTION] in the LOCAL
mode.
2. Touch the JOG [ ] or [ ] to select [ORI-
GIN].
3. Touch the [ENTER].
4. Touch the [ENTER] again to select [X
OFFSET].
Set the X origin.
5. Touch the JOG [ ] or [ ] to enter the
setting value.
The number above the offset is indicated as the
distance from the origin to the maximum printing
width.
6. Touch the [ENTER].
Display enters the STEP 3.
X
20mm
10mm
Y
New origin position
ORIGIN
X OFFSET
<ent>
ORIGIN ( 500mm)
X OFFSET 0mm
ORIGIN
X OFFSET
<ent>
FUNCTION
ORIGIN
<ENT>
FUNCTION
DATA CLEAR
<ENT>
ORIGIN ( 490mm)
X OFFSET 10mm