MIMAKI UJF-605R II, Инструкция по ежедневному уходу

Страница: 7 / 28

7
In Case Defective Printing is not Resolved
When the station interior is severely contaminated or defective printing is not resolved by
the head cleaning function ( Operation Manual P.2-28), clean the suction nozzle and
the caps with the cleaning kit as follows:
Washing liquid (SPC-0385), Gloves, Cleaning swab(SPC-0386), Goggles
•
When cleaning the station and the heads, be sure to wear the supplied
goggles and gloves, or the ink may get in your eyes.
• Do not use alcohol or water.
• Do not move the carriage out of the capping station by hand. Use the
appropriate operation keys to move the carriage.
The examples of defective printing
These following examples indicate defective printings by using improper heads(nozzles)
caused by dust. Confirm the nozzle condition periodically before or during outputting not to
use in these condition. The nozzle condition can be confirmed by [test print] in this printer.
(Operation Manual P.2-27)
Deflection Nozzle out
Ink dropping Satellite