MIMAKI Tx500P-3200DS, Руководство по эксплуатации

Страница: 96 / 156

3-28
Chapter 3 Setup
Displaying the Information
1
Press the
(MENU)
in Local.
2
Press to select “Information” and
press the key.
• Information menu appears.
3
Press to select a item.
• Refer to the “Information menu”, and select the
information to be displayed.
4
Press key.
• If you selected [List] in step 2, the machine’s
settings will be printed.
5
Press key several times to end
the setting.
Resetting wiper use count
1
“Usage” of Information menu is displayed.
(1) Press the [FUNC1] (MENU) in Local
(2) Press [  ][  ] to select “Information”, and
press the [ENTER] key twice.
2
Press to select “Wiping” , and
press the (

) key.
• A confirmation screen appears asking if you want
to clear the use count of the wiper.
3
Press the key to clear the counter.
• The use count of the wiper is cleared.
Displaying the Information of this
machine
1
Press the key in Local.
2
The information is displayed sequentially
with the
key .
• The information shown on the below appear.
3
Press the key to return to Local.
Ink information
Error/ Warning
(Only at the time of
occurrence)
Machine information
(Media width/ Serial No. /
Version)
Nozzle check result
(The number of missing
nozzles detected by nozzle
check)
Sb310
4.
B
80% No Error
3.
B
80% No Error
2.
M
90% No Error
1.
M
90% No Error
Warning
Media Undetected
!NCU CONNECT
Warning
Media width 3200mm
0.5mm Head gap
'00000000 Serial No.
V1.00 TS500P-3200
No Connect LAN status
Information
Nozzle Check
０
０
０
０
０
M
B
Y
K
M
Line1 M
Line1 B
Line1 Y
Line1 K
Line2 M
1/3
>> <<