Chapter 3 Setup
3-5
3
2
2
Register the optimal print conditions
to match the use
In this machine, you will be able to register print
conditions, SETUP 1 to 4 individually to match the media
in advance.
For example, after print on different types of media, return
to the media always use. In such case you can set the
optimum printing conditions by simply selecting the
registered SETUP 1 to 4.
Register the print conditions to SETUP
1 to 4
1
Press the
(MENU)
key in
Local.
2
Press
to select SETUP 1 to 4, and
press
key.
• The item selected indicates ● and others show ○.
• Setup menu will be displayed.
3
Press
to select and set each item
in the setup menu list.
• Please see the reference page in the setup menu
list for detailed configuration procedure.
How to use [Temporary]
[Temporary] is not only to set the print condition to be
used only once, but also can be used for partial change of
the registered SETUP "1 to 4", or for reflecting the print
conditions set by the [Temporary] to SETUP 1 to 4.
Register the print conditions in [Temporary]
Registration of the print conditions to [Temporary] can be
done as the same method as to SETUP 1 to 4.
1
Press the
(MENU)
key in
Local.
2
Press
to select “Temporary”, and
press the
key.
• Setup menu will be displayed.
3
Press
to select and set each item
in the setup menu list.
• Please see the reference page in the setup menu
list for detailed configuration procedure.
Copy the contents of SETUP 1 to 4 to
[Temporary]
You can use it with changing the part of registration
contents of Setup 1 to 4.
Select “copy” from the Setup Reset menu of Temporary,
and specify the copy source (Setup 1 to 4).
1
Press the
(MENU)
key in
Local.
2
Press
to select “Temporary”, and
press the
key.
• Setup menu will be displayed.
3
Press the
(<<).
4
Press
to select “Setup Reset”,
and press the
key.
• Selection screen of the copy source will be
displayed.
5
Press
to select “Copy” and
press the
key.
• Selection screen of the copy source will be
displayed.
6
Press
to select copy source
(Setup 1 to 4), and press
key.
• Confirmation screen of the copy will be displayed.
7
Press
key.
• Settings selected in step 6 is copied to Temporary.
8
Press
to change the setting item,
and press the
key.
• Please see the reference page in the setup menu
list for detailed configuration procedure.
Reflect The Content Set In [Temporary] To
Setup 1 To 4
1
Press the
(MENU)
key in
Local.
2
Press
to select “Temporary”, and
press the
key.
• Setup menu will be displayed.
3
Press
to select and set each item
in the setup menu list.
• Please see the reference page in the setup menu
list for detailed configuration procedure.
4
Display the last page of Temporary and
select “SAVE SETTING”, and press the
key.
• Selection screen of the save location will be
displayed.
• Print conditions that can be pre-registered with the
machine are the four types, “SETUP 1” to “SETUP
4”.
• If you print with the print condition which do not
often use, you will be able to set the print
conditions by selecting “Temporary”.
If turn on the power again, settings in “Temporary”
will return to the original state when it was
purchased.
Also if turn on the power again in “Temporary”
state, it will be the state in selecting “SETUP 1”.
Содержание Tx500P-3200DS
