MIMAKI Tx500P-3200DS, Руководство по эксплуатации

Страница: 121 / 156

4-25
4
2
Chapter 4 Maintenance
5
Mount a new HF filter (SPA-0189).
• Insert the holes of right and left of the HF filter into
the convex part of the carriage.
6
Return the HF filter cover to the original
status.
7
When replacement has been completed,
press the
key.
Discard the expired ink
If the expired ink is continued to use, it may cause a
reduction of print quality and a failure of the machine.
Once ink exceeds its expiration date, please promptly
exchange it with the following procedure.
1
Press the
(MENU)
in LOCAL.
2
Press to select “Maintenance”
and press the key.
3
Press the
(>>)
.
4
Press to select “Waste Expired
ink” and press the key.
5
Press to select a discard ink tank
and press the key.
• The display it will display a confirmation screen of
discard the expired ink. Also, ink type and date
(month and year) will display.
6
If there is no problem on the confirmation
screen, press the
key.
• This resets the ink charge information embedded
in this machine.
7
Discard the ink in the ink tank selected in
step 4.
• When disposing of ink, call for service from our
company or our distributor.
8
Refer to “Fill ink in the ink tank and
charging” on P.1-10, and refill with new ink.
• The HF filter is located at right and left of the
carriage.
Replace both filters at the same time.
• Ink at printing adheres to the HF filter ASSY. When
replacing the filter, it is recommended to perform
the work with a sheet of paper placed.
new HF filter
• Be sure to wear the accompanying gloves and
protective goggles before working. Otherwise, you
may get ink in your eyes.
• When disposing of ink, call for service from our
company or our distributor.
• Request that an industrial waste disposal
company process the disposal ink.