MIMAKI Tx300P-1800B, Руководство по эксплуатации, Страница: 77 / 144

Chapter 3 Machine setting
3-17
1
2
3
4
5
6
5
Press the key several times to
end the setting.
Setting the Drying Feed
After printing, set the media feed length for drying
uniformly to the end of the media.
1
Press
(MENU) (twice)
in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press (>>) .
3
Press to select “DRYING FEED”,
and press the key.
4
Press the key.
• “DRYING FEED” will be selected.
5
Press to input the feed length of
media, and press the key.
6
Press the key several times to
end the setting.
Setting a LANGUAGE
You can change the displayed language.
1
Press
(MENU) (twice)
in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press
(>>)
.
3
Press to select “LANGUAGE”,
and press the key .
4
Press to select language, and
press the key .
5
Press the key several times to
end the setting.
Setting Time
You can set time of your country (time difference).
1
Press
(MENU) (twice)
in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press
(>>)
.
3
Press to select “TIME”, and
press the key.
4
Press to enter time,
and press the key.
• Year/Month/Day/Time selecting :
by the [

][

]
• Year/Month/Day/Time inputting :
by the [

][

]
5
Press the key several times to
end the setting.
• To improve image quality for printing, we
recommend selecting “ON” in step 4.
• According to the position of your external heater,
please configure that the rear end of printing can
pass through the heater.
• -20 hours to +4 hours can be set.