MIMAKI TextileJet Tx2-1600 Series, Руководство по эксплуатации

Страница: 148 / 154

- A.2 -
BASIC SPECIFICATIONS
Item Tx2-1600
Printing head Method Piezo-electric drop-on demand
Specification Eight-heads (4 x 2 lines, Stagger arrangement)
Nozzle High speed printing : 360 nozzles for each color
Printing speed Two independent printing : 180 nozzles for each color
Resolution 360 , 540, 720 dpi
Drawing mode Resolution 360 x 360 dpi : 2 / 4 / 8passes, Unidirection / bidirection
Pass 360 x 540 dpi : 3 / 6 / 12 passes, Unidirection / bidirection
Printing direction 360 x 720 dpi :4 / 8 / 16 passes, Unidirection / bidirection
720 x 720 dpi : 4 / 8 / 16 passes, Unidirection / bidirection
Ink type Acid dye ink Color (Gray, Black, Cyan, Magenta, Yellow, Light Cyan, Light Magenta,
Color Blue, Red)
Disperse dye ink Color (Gray, Black, Cyan, Magenta, Yellow, Light Cyan, Light Magenta,
Blue, Light Blue)
Reactive dye ink
Color (Gray, Black, Cyan, Magenta, Yellow, Light Cyan, Light Magenta,
Blue,Orange, Red, Golden Yellow)
Delivery system of ink Proprietary system with low ink detection sensor
Correction of the remaining amount of ink provided.
INK END detection function is provided.
Ink cartridge replacement method
Capacity of ink cartrige 220 cc ± 10 cc per cartrige (x1 or x2)
About 200cc can be used for each cartridge.
Fabric type The following cloths are excluded.
• Cloths which become elastic with water
• Cloths with high elasticity
• Curled or folded cloths
• Cloths with a low firing point (when the optional drying unit is used)
Max. Printing width Width 1620 mm
Fabric size Thickness 7.0 mm or less
(Roll fabric)
Roll outside diameter
φ 180 mm or less
Roll weight 15 Kg or less
Roll inside diameter
1.35 Inch, 2 Inch, 3 Inch
Printing surface Printing can be made on either side.
Roll end treatment
Light-adhesive tape is used to allow the paper to be removed from the
core with ease.
Margin Left end 10 mm ± 0.5 mm
(Roll fabric) Right end 10 mm ± 0.5 mm
Distance accuracy Absolute accuracy
Whichever the larger one of ± 0.5 mm or ± 0.3 % of the designated
Reoroducibility Whichever the larger one of ± 0.5 mm or ± 0.3% of the designated
Perpendecularity ± 0.5 mm / 1000 mm
Fabric skew 5 mm or less / 10 mm variable (Centering ON)
Head height adjustment 1.1 mm to 10 mm variable from the platen surface
Cutting of fabric Cutter function not provided.
Fabric delivery Take-up device as standerd (inside winding / outside winding selectable)
Waste ink tank Waste ink hose standard (Waste ink tank not provided)
Interface IEEE1394, IEEE1284
Command MRL-1E (ESC/PV.1 base) Mimaki original command
Noise during standby Less than 56 dB
Noise during continuous printing Less than 66 dB
Noise during discontinuous printing Less than 70 dB
Safety Standard FCC ClassA, UL1950
Power AC 100 - 240 V ± 10% (Auto voltage)
Power consumption 450 W or less