MIMAKI TextileJet Tx2-1600 Series, Руководство по эксплуатации

Страница: 109 / 154

- 3.21 -
Continuing printing after [INKnearEND] [PRINT CONT.]
If the remaining amount of ink decreases during printing and [INKnearEND] appears, you can
replace ink for each ink station and then continue printing for the next file.
ON : Even if [INKnearEND] appears, you can use only one ink station to
continue printing for the next file.
OFF : When printing for the file with [INKnearEND] occurrence is com-
pleted, you need to replace ink.
•
If different types of ink are set in the two ink stations, this function cannot
be used since [PRINT CONT.] is not displayed on the LCD.
• If [INKEND] occurs during printing, printing is stopped.
STEP
1. Select a type.
(See page 3.4). Here, select [Type.1].
2. Push the [ENTER] key.
3. Push the [ ] and [ ] key until the display gives
the indication [PRINT CONT.].
4. Push the [ENTER] key.
5. Set a [PRINT CONT.] by pushing the JOG keys
[ ] and [ ].
Here, select [ON].
6. Push the [ENTER] key.
7. Push the [END] key twice, and the menu re-
turns to the LOCAL mode.
SET UP
SELECT
: TYPE.1
TYPE.1
MEDIA COMP.
< ent >
TYPE.1
PRINT CONT.
< ent >
TYPE.1
PRINT CONT.
: OFF
TYPE.1
PRINT CONT.
: ON
TYPE.1
PRINT CONT.
< ent >
<< LOCAL >>
width : 1272mm