MIMAKI SWJ-320EA, Руководство по эксплуатации

Страница: 29 / 116

2-3
2
2
2
2
Turning the Power ON/
OFF
Turning the Power ON
This machine is provided with the following two power
switches:
Main power switch
:
It is located on the side of this machine.Keep this switch
ON all the time.
[END/POWER] key
:
Normally, use this key to turn the power ON/OFF.
The nozzle missing prevention function periodically
operates even with the [END/POWER] key turned OFF
when the main power switch is turned ON.
1
Turn the main power switch ON.
• Set the main power switches located on the side
of this machine to the “I” side.
2
Turn the power on, by pressing the
key.
• The machine enters LOCAL.
• The firmware version is displayed when the power
is turned ON, and the machine performs its initial
operation.
3
The machine enters LOCAL.
4
Turn ON the power of the connected PC.
Turning the Power OFF
When having ended the operation of the machine, turn the
power OFF by pressing the power button located on the
front side.
Check the following items when turning the power OFF.
• If the machine is receiving data from the PC or if there is
any data that has not been output yet
• If the head has returned to the capping station
• If any error has occurred (
P.5-11 “Error messages”
)
1
Turn OFF the power of the connected PC.
2
Turn the power off, by giving the
key a long press.
• Do not turn OFF the main power switch located
on the side of the machine.
• To use this machine again, press the [END/
POWER] key .
Cautions about Turning the Power OFF

Do not turn the main power switch OFF.
When the main power switch is ON, the power
periodically turns ON and the nozzle missing
prevention function (flushing function) operate.
When the main power switch has been turned OFF,
the auto maintenance functions, such as flushing, do
not operate, and this may cause nozzle missing.

Keep the front cover and the maintenance
cover closed.
If any of the covers is opened, it will not work auto
maintenance functions such as flushing.

Turn the power OFF after having checked the
position of the head.
If the power is turned OFF in a state where the head
has not returned to the capping station, the head
dries, which may cause nozzle missing.
In this case, turn the power ON again and check that
the head has returned to the capping station, and turn
the power OFF.

Do not turn the power OFF during printing.
The head may not return to the capping station.

After having turned the power switch OFF by
pressing [END/POWER] key, turn the main
power switch OFF.
When turning the main power switch off for moving the
machine or for solving the error or the like, press the
[END/POWER] key a long time on the front of the
machine, check the display is turned off on the
operation panel, and turn the main power switch off.
• Turn the power ON after the front cover and
maintenance cover are closed.
• Always make the main power switch ON. If you
leave it OFF, it may cause nozzle missing of the
head. In some cases, recovery may become
difficult.
Main power
switch
Power button
Power button