MIMAKI ML Tiger-1800B MKII, Руководство по эксплуатации

Страница: 40 / 174

3-2
Chapter 3 Usage Precautions
The Intended Use
ML Tiger-1800B MK III is intended for use only when observing all of the following data.
Limit the use of this machine to the operator who has read all the attached documents and understands the procedure
related to handling and feeding of the media roll.
This avoids the use of this machine in abnormal or dangerous situations.
Unauthorized Use
Use this machine for agreed purpose and operate with characteristics complying with the characteristics described in the
current manual.
In case of using different from contract agreement, it is necessary to obtain approval in writing by our company in advance.
In the absence of such authorization, the use is considered as unauthorized use and we do not assume any responsibility
for any consequences that may affect people or objects. Thus the warranty is no longer valid.
The machine may stop due to misuse and the suspension period may be long. In that case, customers will have to call
Mimaki official technical staff.
Emergency Stop by Operator
In the event of mechanical failure, it is necessary to cut electric, hydraulic, and pneumatic (if any) power from the main
power supply, discharge residual pressure in the circuit, and shut down the machine in order to replace damaged parts.
The Service Life of This Machine
The estimated service life of this machine is approximately 30,000 hours when using and maintaining it as described in
this manual. This period is the lifetime assuming use in accordance with the contents described in the "intended use"
section and may change due to modification, special application, technical update.
Table Feature Data
► Print width 1850 [mm]
► Belt width 2000 [mm]
► Print technology Inkjet print head x 16
► media feeding
Roll axial feeding unit with brake
Roll characteristics: Diameter 400 [mm], weight 100 [Kg]
► Ink color 8 colors (C, M, Y, K, R, Or, Bl, Lk)
► Ink feed 10L tank x 8
► Ink type Reactive dye
► Power supply 380 [V] 3-phase 5 lines (L1, L2, L3, N, PE) 50/60 [Hz]
• In case of faults or operator hazards, press the emergency switch to stop the machine in order to prevent
damage spreading.