MIMAKI ML Tiger-1800B MKII, Руководство по эксплуатации

Страница: 172 / 174

Chapter 9 MAINTENANCE
9-28
Dismantling
To move this machine to another location during the service life of it, proceed as follows:
Procedure Dismantling
S Mode Key Indication Feature Reference
1
Turn off the machine and disconnect from all power
sources.
2
Clean the machine and protect the parts subject to
corrosion, using appropriate products.
3
For transporting and installing to a new location, follow
the means and methods described in this manual.
4
Use lubricant or grease in this machine. Use an
approved degradable solvent to neutralize
unrepairable lubricant adhering to parts of this
machine.
5
Move recoverable waste oil to an empty tank and
consign it to a waste oil processing company.
6
Properly dispose of any batteries, accumulators,
battery of the electronic boards and conditioner that
may be present on the machine.
7
Once the machine reaches its end of the service life, it
must be taken out of service as it cannot be used for
the purposes for which it was designed and built;
however, its parts and raw materials are reusable.
8
However, such reuse shall be subject to conditions
and functions different from the design and
construction of individual parts and the entire
machine.
9
Mimaki assumes no responsibility for injury or
property damage caused by reuse of each part of this
machine in a function different from the original one or
the assembling situation.
10
Mimaki will not approve the adaptability of the parts to
be reused after the final removal of this machine,
either explicitly or implicitly.
End of procedure